Simplicity® PhotoSlide Lighting Control System

Daylight Harvesting and Slide Control of LED’s or Electronic Ballasts, Through a Single Switch

Hunt Simplicity Digital Dimming Rack

The Simplicity® PhotoSlide Lighting Control System
is a cost-effective and energy efficient way to control LED or electronic ballast lighting. Combining
the Simplicity® Sensor and the Slide Dimmer switch, the PhotoSlide™ system provides the savings of daylight harvesting with the flexibility of slide control dimming. You can minimize electrical usage across a room’s LED or ballast-driven lighting while still having the ability to slide-dim or even shut-off the lighting. All done at the source, using a single sensor and switch.

Daylight harvesting from LED’s or as many as fifty ballasts, with only one sensor A key component to the PhotoSlide™ Lighting Control System is the Simplicity® Sensor. The Photo Sensor will achieve specified light levels by measuring the amount of existing daylight in a room and supplementing with light from LED or fluorescent fixtures. This class 2 adjustable sensor is photodiode based and can be used to control LED’s or up to fifty 0-10V fluorescent dimming ballasts.

Slide control gives you maximum lighting options
Another key element of the PhotoSlide™ system is the Slide Dimmer. This switch provides the ability to turn the lights ON or OFF, or anything in between. The device provides flicker-free dimming of each fixture’s output, from 100% all the way down to 5%. It also provides a choice of 120VAC or 277VAC, in either a single-pole or 3-way device.

LEED benefits with minimal expense
These days it’s all about being "Green". The LEED Green Building Rating System is leading the way in defining building standards. The cost-effective PhotoSlide™ Lighting Control System is a great way for you to meet some of those standards while staying within a stringent budget.

A perfect solution for small offices and classrooms
The PhotoSlide system allows you to take advantage of a room’s existing daylight, supplement it with the overhead LED or fluorescent lighting and then slide dim the lighting to any level you need. In offices and classrooms the occupants can dim or shut-off the room lighting for overhead presentations, smartboard demonstrations or any other circumstance where special lighting is required. The PhotoSlide™ system can be installed quickly and easily, using only low-voltage wiring. Imagine, daylight harvesting and LED or fluorescent light dimming, without the need for complex lighting control panels.

A proven history with lighting control
HUNT has been providing the industry with lighting controls for more than 50 years. The Simplicity® PhotoSlide Lighting Control System boasts the highest level of quality, with a wide range of features. You can trust that these sensors will install and operate quickly and easily.

An ideal lighting solution
If you are searching for an inexpensive way to combine daylight harvesting and dimming control using a single manual switch, the PhotoSlide system is a perfect solution. Talk to us about ways to incorporate it into your next project.

Simplicity ® PhotoSlide Features

  • LED and Fluorescent ballast dimming options available
  • Easy to install
  • Cost effective
  • Daylight harvesting
  • No programming required
  • Ideal for small locations
  • Control up to 50 ballasts from one PhotoSlide system
  • Continuous flicker free control from 100% to 5%
  • 120VAC or 277VAC
  • Single-pole or 3-way device
  • Class 2 adjustable sensor, photodiode based
  • UL 1472 & 916 Listed/li>
  • Made in U.S.A.
  • ARRA project complient

product information:

PhotoSlide Brochure
Download
PhotoSlide Brochure
PS-LED -010-277V Cut Sheet
Download
PhotoSlide Data Sheet
Simplicity Photo Sensor
Download
Simplicity® Photo Sensor Data Sheet
Simplicity Photo Sensor
Download
PhotoSlide Ordering Information
PS-LED -010-277V Cut Sheet
Download
HUNT Dimming Daylighting Overview